Perdure SLE(T)

Perdure SLE & SLE-T- Self-Leveling epoxy (Regular & trowel grade)

Perdure SLE (Self-Leveling Proxy) and SLTE-T (self-leveling epoxy trowel grade) are very important components that are best suited for industrial flooring. They are made to restore and replace eroded concrete floors. We all know that such floors are very ugly and undesirable. Duraamen is the number one seller of Perdure SLE (Self-Leveling Proxy). It has achieved so much in the past few years because of its emphasis on quality products sold at reasonably low prices.  Perdure SLE & SLTE-T is a self-leveling seamless flooring system. It is made up of a pre-proportioned epoxy resin, hardener and selectively graded aggregates. The main goal of the compound is to protect any kind of floor from abrasion, chemical attack and industrial abuse. As noted above, it also restores damaged floors.

Why use Perdure SLE/T

  • Restores a damaged floor and ensures that it is good looking
  • Protects any kind of concrete floor from abuse
  • It is arelatively cheap option when compared to traditional methods
  • It provides slip resistant surfaces to the users
  • It is 100% solid and thus has no odor

Who uses Perdure SLE/T

Perdure SLE/T is recommended for any kind of floor that is exposed to risk factors. Some of the places which can find the compound very useful are:

  • Warehouses
  • Industrial plants
  • Laboratories
  • Production facilities
  • Traffic aisles
  • Clean rooms

How it is applied

The compound is applied depending on the nature of the floor and the conditions which it is exposed to. The size ranges from 1/16” to 1/4’.  It is applied as a three- component of 100% solids epoxy primer, 100% solids epoxy body coat that is blended with self-leveling filler and a polyurethane top coat. It is recommended that a qualified and certified installer is handled the task of installing Perdure SLE/T.

Perdure EO2- 100% solids epoxy primer

Perdure EO2 is a very important element used for all kinds of floors. It is used to provide an excellent fitting and scaling properties needed under high performance epoxy floor coatings on concrete. It is a 100% solids, moisture tolerant epoxy primer used for concrete and masonry surfaces.  It is made of Polyamide-modified epoxy resin and wetting agents.  One of the main important properties of Perdure EO2 is the fact that its moisture tolerance which allows it to easily bond ‘old to old’ or ‘new to old’ surfaces.  It is available throughout United States and Canada.

Why use Perdure EO2

  • Cost effective
  • Fast curing property
  • Moisture insensitive cure
  • Low viscosity which ensures good wetting properties
  • Conforms to ASTM C-881 Properties

Perdüre E10 | 100% solids multipurpose epoxy binder

Perdure E10 is an excellent odorless and multi-purpose material from Düraamen. It is a 100% solids and epoxy binder Düraamen self-leveling mortar and quartz systems. It is composed of 100% solids amine cured epoxy resin and is available in America and Canada.

Why use Perdure E10

  • Can be applied in occupied areas
  • Reasonable price
  • Good trowelling properties when used in mortar systems
  • Excellent color retention when used as a top coat with Düraamen flooring systems
  • USDA approved for food handling
  • Available in a fast cure systems

For more information about the compound, visit the link http://www.duraamen.com/site_media/media/product_files/perdure-e10.pdf

Perdüre E20 | 100% solids pigmented epoxy floor coating

Perdure E20 is a very important compound which is made of 100% solids, pigmented epoxy floor coating. The compound is designed to provide high gloss, chemical resistant protection.  It is advised that the compound should be used wherever a high build, corrosive resistant, protective floor coating is required. It provides a smooth, high gloss finish.  In a heavy body form, an orange peel texture finish is the outcome. It has been used by thousands of clients in America and Canada

Why use Perdure E20

There are a number of reasons why the compound is important. Some of them are:

  • Odorless thus can be applied in occupied places
  • Ensures that the floor is long lasting and durable
  • Zero VOC
  • Relatively reasonable pricing
  • Easy application and clean up with detergents or soaps

Perdüre NE25 | 100% solids Novolac modified epoxy

Just like other types of Perdures, Perdure 25 is a very important compound that is made of 100% solids epoxy which is modified with Novalac epoxy floor coating. The main purpose for the compound is to provide a high chemical resistance protection which is very common in many firms and in small cases, residential places. The compound should be used where a high build, acid and alkali resistant, protective floor coating is required.  It provides a unique feel to the floor and a smooth, high gloss finish. In heavy body form, an orange peel, textured finish is a result.

Why use the Perdure NE25

There are many reasons why the compound is relevant especially to high performance industrial floor systems:

  • Easy application
  • Relatively low price
  • Bonds very well to cool and damp substrates
  • Low odor for use in occupied places
  • Zero VOC
  • Suitable for immersion and wet processing floor systems
  • Superior chemical and stain resistance

Perdüre NE30 | 100% solids Novolac modified epoxy chemically resistant

Perdure NE30 is a 100% solids epoxy Novalac coating. It is very ideal for severe chemical and solvent resistant applications. Perdüre NE30 is available in clear as well as standard colors. However, one can order custom colors. It is an excellent for secondary containment, solvent storage, pump pads, trenches and other high exposure areas.

Why use Perdure NE30

  • Low viscosity which is very ideal for trowelled mortar and slurry applications
  • Relatively low prices
  • High resistance to strong acids, alkalis and strong industrial chemicals
  • 100% solids thus odorless which ensures application in occupied areas